Model Number: 3D pen-1st
Brand Name: CARLIAS
Key Specifications/Special Features:
Specification:Type: fused deposition modelingMolding method: 3D modelingColor: grey, Orange, Blue, YellowPlug: US EUR AU UK PlugSprinkle speed: adjustable
Heating tempreature:160° to 230° adjustable
Power input: 12V/3A
Nozzle diameter: 0.4/0.7mm
Printing area: unlimited
Guide:
1. Put the power adapter AC plug into the outlet DC plug into the "power input" hole, the yellow LED turn on and the pen is started and standby
2. Press the "wire feeding" button, the red led turn on and the pen is under preheating, after o.5-2minutes later, the red LED turn to blue, preheating finished the pen is ready to use
3. Insert thefilament material into the" wire loading hole "which is at the end of the pen,another hand keep on pressing the "wire feeding" button, the material will be loaded by built-in motor, wait there is plastic liquid come out from the nib nozzle, the material loading is succeed
4. Painting, (speed controller can adjust the spray amount according the moving speed, no need to use both hands)
5. Do not touching the nozzle and heating parts during the drawing for your fusty
6. Device will switch to standby model if stop using over 5 minutes, the "working LED "will turn off, when use again, need press the "wire feeding" button to restart
7. When need to unloading or change the material, please repeat the step 2 and keep on pressing on "wire unloading" button
"*" Heating time affected by the setting temperature and environmental temperature
"**" Must cut the material ending to smooth before loading the material
"***" unloading the material after each use is highly recommended
Warning!!!
This device suitable for children 8 years old and adult use
Children should use it under adults
The painting pen nib and the near area are dangerous high temperature area, the highest temperature can reach 230°, do not touch the nib with hands or touch others objects with the nib
Do not block the wire loading hole with foreign body
Do not use non-official power adaptor from other company
Do not use non-official consumable material from other company
This device is precision electronic instrument, no water sprinkling
Keep at safety place after using to prevent from high falling or children touching.
Packing:
1x 3D pen
1x power adapter (US, UK, AU, EUR)
3x 10M free filaments
1x user manual
Guide:
1. Put the power adapter AC plug into the outlet DC plug into the "power input" hole, the yellow LED turn on and the pen is started and standby
2. Press the "wire feeding" button, the red led turn on and the pen is under preheating, after o.5-2minutes later, the red LED turn to blue, preheating finished the pen is ready to use
3. Insert thefilament material into the" wire loading hole "which is at the end of the pen,another hand keep on pressing the "wire feeding" button, the material will be loaded by built-in motor, wait there is plastic liquid come out from the nib nozzle, the material loading is succeed
4. Painting, (speed controller can adjust the spray amount according the moving speed, no need to use both hands)
5. Do not touching the nozzle and heating parts during the drawing for your fusty
6. Device will switch to standby model if stop using over 5 minutes, the "working LED "will turn off, when use again, need press the "wire feeding" button to restart
7. When need to unloading or change the material, please repeat the step 2 and keep on pressing on "wire unloading" button
"*" Heating time affected by the setting temperature and environmental temperature
"**" Must cut the material ending to smooth before loading the material
"***" unloading the material after each use is highly recommended
Warning!!!
This device suitable for children 8 years old and adult use
Children should use it under adults
The painting pen nib and the near area are dangerous high temperature area, the highest temperature can reach 230°, do not touch the nib with hands or touch others objects with the nib
Do not block the wire loading hole with foreign body
Do not use non-official power adaptor from other company
Do not use non-official consumable material from other company
This device is precision electronic instrument, no water sprinkling
Keep at safety place after using to prevent from high falling or children touching.
Packing:
1x 3D pen
1x power adapter (US, UK, AU, EUR)
3x 10M free filaments
1x user manual
Shipping Information:
- FOB Port: Shenzhen
- Lead Time: 3 - 6 days
- Dimensions per Unit: 22 × 17 × 6.5 Centimeters
- Weight per Unit: 500 Grams
- Units per Export Carton: 30
- Export Carton Dimensions L/W/H: 52 × 45 × 32.5 Centimeters
- Export Carton Weight: 18 Kilograms
Main Export Markets:
- Eastern Europe
- North America
- Western Europe